|Max. Work piece Dimension(mm)||W900xD600xH215|
|Max. Work piece Weight(kg)||600|
|Travel of X,Y (mm)||500×300|
|Travel of U,V (mm)||80×80|
|Travel of Z (mm)||220|
|Wire Diameter||ø 0.15~0.3 mm|
|Number of Axes Control (mm)||5 Axis AC servo motor|
|Maxi. Taper Angle||±22°/80 mm|
|Machine Dimension (mm)||W23050xD2420xH2100|
|Machine Weight (kg)||2750 kg|
Dielectric Tank Specifications
|Tank Capacity (L)||300 L|
|Paper Filter (PCS)||2 pcs|
|Chiller unit||Auto (optional)|
|* The content of this catalogue is subject to be changed by the factory.|
- Ion exchange resin
- Paper filter x 2 pcs
- Diamond guide x 2 pcs
- Upper and lower flushing nozzle x 2 pcs
- Energizing plates x 2 pcs
- Brass Wire x 1 spool
- Clamping tool 1 set
- Auto Wire Threading
- XY axis linear scale
- Clamping Beam
- AVR 15KVA
- Chiller Unit
- To ensure thermal balance, rib location is designed by Finite Element Analysis (FEA) assuring an optimized rigid structure.
- Rigid U and V truss design.
- High response AC servo motor for provide accuracy.
- Stainless steel worktable hardened with HRC50.
- Water-cooled lower arm prevents thermal expansion caused by heat build-up, maintaining accuracy.
Laser calibration – for the calibration and compensation of pitch errors or displacement errors of the machine structure.
Micron level precision is achieved through the selection of class leading machine motion elements. The cryogenically treated C1 grade ball screws are driven by high resolution AC servomotors, and are supported by widely spaced linear guide ways for maximum stability.
Intelligent Machining mode
Auto Wire Threading
High Speed Auto Wire Threading System
- Wire annealing and cutting : 10 sec
- Threading : 10 sec
Reliable Auto Wire Threading system
The EXCETEK AWT is very sophisticated design that provides continuous unmanned operation day and night. Unlike other systems it can thread at the point of the wire breakage.
A water jet function enables the machine to thread workpieces up to 500mm.
The corner control
Corner control machining parameter controls the machining speed and inhibiting the wire twisting phenomenon, hence reduce cornered ‘washout’, ensuring machining accuracy and molding compatibility, hence effectivelyimprove molding machining quality and speed.
Operator can adjust quality priority or speed priority according to wire diameter or thickness selector.